logo of WhatsApp
+91 76111 75111
[email protected]
LinkedIn
Instagram
YouTube
Google+
Refer and Earn
Internship
Authorized Pearson VUE Test Center
Product was added to your cart

Cart

Center Of Excellence For CCIE Mapped Certification Training

cisco ccnp training
Course Details in PDF
CCIE Certification
Course Schedule
Boot Camp
CCIE Certification

The CCIE is the crème-de-la-crème of Networking certifications, and there are less than 50,000 CCIEs worldwide across all specializations. To get into this exclusive club, you need to train with the very best people who have decades of expertise in teaching, implementing and managing enterprise class networking projects.

The Networking industry is facing an acute shortage of qualified and trained CCIE Mapped professionals. ZOOM intends to fill this gap by providing the highest quality of CCIE Mapped training, with world class professionals and state of the art lab infrastructure.

The ZOOM Centre-of-Excellence for CCIE mapped certifications is the best fit to achieve this most coveted certification of the Networking world. The instructor led courses at the CCIE Mapped Centre-of-Excellence are taught under the guidance of CCIEs who have several years of real time experience in designing, implementing & managing large-scale networks like SWANs & Campus wide LANs, and not with mere academic knowledge got from books.

The instructors are highly experienced and certified CCIEs, who have been instrumental in setting up some of the largest networks in India. These Internetworking Experts have a thorough understanding of Cisco’s real time network design and implementation coupled with strong experience in conducting CCIE boot camps.

The course covers all the aspects of CCIE Routing and Switching Version 5. Labs are case study based, on state-of-the-art routers and switches meeting the requirements for CCIE certification.

Zoom has a proven track record of over 15 years in training people for CCIE Mapped Certification.

Zoom trains over 1000 engineers every month for CCNA/CCNP Mapped Certification which is a World Record.

Course Schedule

Course Duration: 1 Month (156 hours including practicals)

Indore Institute

Mail us on: [email protected] for the next available batch

Month Batch/Track Starting Date Timings
January
To
December		 Morning 15th of Every Month 7.30 a.m.
Evening 6.00 p.m.
  • Practical’s / labs for Morning batch can be done 3 hours after the theory session
  • If 15th is a Sunday or National holiday then the course will start on next workingday.
  • Practicals / labs for the morning batch can be done 2 hours after the theory session.
  • Practicals / labs for the afternoon batch can be done 2 hours before or after the theory session.
  • Practicals / labs for the evening batch can be done 2 hours before the theory session.
  • If 15th is a Sunday or national holiday the course will start on the next working day.
  • This classroom training is offered at our Ameerpet branch.

Faculty: The instructors who execute various training programs including several CCNA training certifications offered by Zoom Technologies are a team of over 250 highly experienced engineers with international exposure and strong experience working in various live, real-time environments and implementations.

Boot Camp

CCIE - Routing and Switching Boot Camp:

Course Name Exam Code Boot Camp Special Offer
CCIE Routing and Switching – Version 5.0

  • CCIE R&S v5 – (Written & Lab Exam Focus) By CCIE & CCSI Certified Expert
  • Full scale 8 hour Real Exam Labs (Both Configuration & Troubleshoot)
  • Unlimited Lab Access for 1 Year
  • Individual Rack for every Student
 (400-101) 12 Days
(8 hours / day)

Approximately $ 400 US /
INR 30,000 Only
+
(18%GST and 5% Surcharge)

Bootcamp Schedule
March-2018 15th to 30th March 2018
1.0 Network Principles
2.0 Layer 2 Technologies
3.0 Layer 3 Technologies
4.0 VPN Technologies
5.0 Infrastructure Security
6.0 Infrastructure Services
7.0 Evolving Technologies
1.0 Network Principles
  • 1.1 Network theory
    • 1.1.a Describe basic software architecture differences between IOS and IOS XE
      • 1.1.a (i) Control plane and Forwarding plane
      • 1.1.a (ii) Impact to troubleshooting and performances
      • 1.1.a (iii) Excluding specific platform’s architecture
    • 1.1.b Identify Cisco express forwarding concepts
      • 1.1.b (i) RIB, FIB, LFIB, Adjacency table
      • 1.1.b (ii) Load balancing Hash
      • 1.1.b (iii) Polarization concept and avoidance
    • 1.1.c Explain general network challenges
      • 1.1.c (i) Unicast flooding
      • 1.1.c (ii) Out of order packets
      • 1.1.c (iii) Asymmetric routing
      • 1.1.c (iv) Impact of micro burst
    • 1.1.d Explain IP operations
      • 1.1.d (i) ICMP unreachable, redirect
      • 1.1.d (ii) IPv4 options, IPv6 extension headers
      • 1.1.d (iii) IPv4 and IPv6 fragmentation
      • 1.1.d (iv) TTL &1.1.d (v) IP MTU
    • 1.1.e Explain TCP operations
      • 1.1.e (i) IPv4 and IPv6 PMTU
      • 1.1.e (ii) MSS &1.1.e (iii) Latency &1.1.e (iv) Windowing
      • 1.1.e (v) Bandwidth delay product
      • 1.1.e (vi) Global synchronization &1.1.e (vii) Options
    • 1.1.f Explain UDP operations
      • 1.1.f (i) Starvation &1.1.f (ii) Latency
      • 1.1.f (iii) RTP/RTCP concepts
  • 1.2 Network implementation and operation
    • 1.2.a Evaluate proposed changes to a network
    • 1.2.a (i) Changes to routing protocol parameters
    • 1.2.a (ii) Migrate parts of a network to IPv6
    • 1.2.a (iii) Routing protocol migration
    • 1.2.a (iv) Adding multicast support
    • 1.2.a (v) Migrate spanning tree protocol
    • 1.2.a (vi) Evaluate impact of new traffic on existing QoS design
  • 1.3 Network troubleshooting
    • 1.3.a Use IOS troubleshooting tools
      • 1.3.a (i) debug, conditional debug
      • 1.3.a (ii) ping, traceroute with extended options
      • 1.3.a (iii) Embedded packet capture
      • 1.3.a (iv) Performance monitor
    • 1.3.b Apply troubleshooting methodologies
      • 1.3.b (i) Diagnose the root cause of networking issue (analyze symptoms,
      • identify and describe root cause)
      • 1.3.b (ii) Design and implement valid solutions according to constraints
      • 1.3.b (iii) Verify and monitor resolution
    • 1.3.c Interpret packet capture
      • 1.3.c (i) Using Wireshark trace analyzer
      • 1.3.c (ii) Using IOS embedded packet capture
2.0 Layer 2 Technologies
  • 2.1 LAN switching technologies
    • 2.1.a Implement and troubleshoot switch administration
    • 2.1.a (i) Managing MAC address table
    • 2.1.a (ii) errdisable recovery
    • 2.1.a (iii) L2 MTU
    • 2.1.b Implement and troubleshoot layer 2 protocols
      • 2.1.b (i) CDP, LLDP
      • 2.1.b (ii) UDLD
    • 2.1.c Implement and troubleshoot VLAN
      • 2.1.c (i) Access ports
      • 2.1.c (ii) VLAN database
      • 2.1.c (iii) Normal, extended VLAN, voice VLAN
    • 2.1.d Implement and troubleshoot trunking
      • 2.1.d (i) VTPv1, VTPv2, VTPv3, VTP pruning
      • 2.1.d (ii) dot1Q
      • 2.1.d (iii) Native VLAN
      • 2.1.d (iv) Manual pruning
    • 2.1.e Implement and troubleshoot EtherChannel
      • 2.1.e (i) LACP, PAgP, manual
      • 2.1.e (ii) Layer 2, layer 3
      • 2.1.e (iii) Load-balancing
      • 2.1.e (iv) Etherchannel misconfiguration guard
    • 2.1.f Implement and troubleshoot spanning-tree
      • 2.1.f (i) PVST+/RPVST+/MST
      • 2.1.f (ii) Switch priority, port priority, path cost, STP timers
      • 2.1.f (iii) port fast, BPDUguard, BPDUfilter
      • 2.1.f (iv) loopguard, rootguard
    • 2.1.g Implement and troubleshoot other LAN switching technologies
      • 2.1.g (i) SPAN, RSPAN, ERSPAN
    • 2.1.h Describe chassis virtualization and aggregation technologies
      • 2.1.h (i) Multichassis
      • 2.1.h (ii) VSS concepts
      • 2.1.h (iii) Alternative to STP
      • 2.1.h (iv) Stackwise
      • 2.1.h (v) Excluding specific platform implementation
    • 2.1.i Describe spanning-tree concepts
      • 2.1.i (i) Compatibility between MST and RSTP
      • 2.1.i (ii) STP dispute, STP bridge assurance
  • 2.2 Layer 2 multicast
    • 2.2.a Implement and troubleshoot IGMP
      • 2.2.a (i) IGMPv1, IGMPv2, IGMPv3
      • 2.2.a (ii) IGMP snooping
      • 2.2.a (iii) IGMP querier
      • 2.2.a (iv) IGMP filter
      • 2.2.a (v) IGMP proxy
    • 2.2.b Explain MLD
    • 2.2.c Explain PIM snooping
  • 2.3 Layer 2 WAN circuit technologies
    • 2.3.a Implement and troubleshoot HDLC
    • 2.3.b Implement and troubleshoot PPP
      • 2.3.b (i) Authentication (PAP, CHAP)
      • 2.3.b (ii) PPPoE
      • 2.3.b (iii) MLPPP
    • 2.3.c Describe WAN rate-based ethernet circuits
      • 2.3.c (i) Metro and WAN Ethernet topologies
      • 2.3.c (ii) Use of rate-limited WAN ethernet services
3.0 Layer 3 Technologies
  • 3.1 Addressing technologies
    • 3.1.a Identify, implement and troubleshoot IPv4 addressing and subnetting
      • 3.1.a (i) Address types, VLSM
      • 3.1.a (ii) ARP
    • 3.1.b Identify, implement and troubleshoot IPv6 addressing and subnetting
      • 3.1.b (i) Unicast, multicast
      • 3.1.b (ii) EUI-64
      • 3.1.b (iii) ND, RS/RA
      • 3.1.b (iv) Autoconfig/SLAAC, temporary addresses (RFC4941)
      • 3.1.b (v) Global prefix configuration feature
      • 3.1.b (vi) DHCP protocol operations
      • 3.1.b (vii) SLAAC/DHCPv6 interaction
      • 3.1.b (viii) Stateful, stateless DHCPv6
      • 3.1.b (ix) DHCPv6 prefix delegation
  • 3.2 Layer 3 multicast
    • 3.2.a Troubleshoot reverse path forwarding
      • 3.2.a (i) RPF failure
      • 3.2.a (ii) RPF failure with tunnel interface
    • 3.2.b Implement and troubleshoot IPv4 protocol independent multicast
      • 3.2.b (i) PIM dense mode, sparse mode, sparse-dense mode
      • 3.2.b (ii) Static RP, auto-RP, BSR
      • 3.2.b (iii) BiDirectional PIM
      • 3.2.b (iv) Source-specific multicast
      • 3.2.b (v) Group to RP mapping
      • 3.2.b (vi) Multicast boundary
    • 3.2.c Implement and troubleshoot multicast source discovery protocol
      • 3.2.c (i) Intra-domain MSDP (anycast RP)
      • 3.2.c (ii) SA filter
    • 3.2.d Describe IPv6 multicast
      • 3.2.d (i) IPv6 multicast addresses
      • 3.2.d (ii) PIMv6
  • 3.3 Fundamental routing concepts
    • 3.3.a Implement and troubleshoot static routing
    • 3.3.b Implement and troubleshoot default routing
    • 3.3.c Compare routing protocol types
      • 3.3.c (i) Distance vector
      • 3.3.c (ii) Link state
      • 3.3.c (iii) Path vector
    • 3.3.d Implement, optimize and troubleshoot administrative distance
    • 3.3.e Implement and troubleshoot passive interface
    • 3.3.f Implement and troubleshoot VRF lite
    • 3.3.g Implement, optimize and troubleshoot filtering with any routing protocol
    • 3.3.h Implement, optimize & troubleshoot redistribution between any routing protocol
    • 3.3.i Implement, optimize & troubleshoot manual & auto summarization with any routing protocol
    • 3.3.j Implement, optimize and troubleshoot policy-based routing
    • 3.3.k Identify and troubleshoot sub-optimal routing
    • 3.3.l Implement and troubleshoot bidirectional forwarding detection
    • 3.3.m Implement and troubleshoot loop prevention mechanisms
      • 3.3.m (i) Route tagging, filtering
      • 3.3.m (ii) Split horizon
      • 3.3.m (iii) Route poisoning
    • 3.3.n Implement and troubleshoot routing protocol authentication
      • 3.3.n (i) MD5
      • 3.3.n (ii) Key-chain
      • 3.3.n (iii) EIGRP HMAC SHA2-256bit
      • 3.3.n (iv) OSPFv2 SHA1-196bit
    • 3.3.n (v) OSPFv3 IPsec authentication
  • 3.4 RIP (v2 and v6)
    • 3.4.a Implement and troubleshoot RIPv2
    • 3.4.b Describe RIPv6 (RIPng)
  • 3.5 EIGRP (for IPv4 and IPv6)
    • 3.5.a Describe packet types
      • 3.5.a (i) Packet types (hello, query, update, and such)
      • 3.5.a (ii) Route types (internal, external)
    • 3.5.b Implement and troubleshoot neighbor relationship
      • 3.5.b (i) Multicast, unicast EIGRP peering
      • 3.5.b (ii) OTP point-to-point peering
      • 3.5.b (iii) OTP route-reflector peering
      • 3.5.b (iv) OTP multiple service providers scenario
    • 3.5.c Implement and troubleshoot loop free path selection
      • 3.5.c (i) RD, FD, FC, successor, feasible successor
      • 3.5.c (ii) Classic metric
      • 3.5.c (iii) Wide metric
    • 3.5.d Implement and troubleshoot operations
      • 3.5.d (i) General operations
      • 3.5.d (ii) Topology table, update, query, active, passive
      • 3.5.d (iii) Stuck in active
      • 3.5.d (iv) Graceful shutdown
    • 3.5.e Implement and troubleshoot EIGRP stub
      • 3.5.e (i) Stub
      • 3.5.e (ii) Leak-map
    • 3.5.f Implement and troubleshoot load-balancing
      • 3.5.f (i) equal-cost
      • 3.5.f (ii) unequal-cost
      • 3.5.f (iii) add-path
    • 3.5.g Implement EIGRP (multi-address) named mode
      • 3.5.g (i) Types of families
      • 3.5.g (ii) IPv4 address-family
      • 3.5.g (iii) IPv6 address-family
    • 3.5.h Implement, troubleshoot and optimize EIGRP convergence and scalability
      • 3.5.h (i) Describe fast convergence requirements
      • 3.5.h (ii) Control query boundaries
      • 3.5.h (iii) IP FRR/fast reroute (single hop)
      • 3.5.8 (iv) Summary leak-map
      • 3.5.h (v) Summary metric
  • 3.6 OSPF (v2 and v3)
    • 3.6.a Describe packet types
      • 3.6.a (i) LSA types (1, 2, 3, 4, 5, 7, 9)
      • 3.6.a (ii) Route types (N1, N2, E1, E2)
    • 3.6.b Implement and troubleshoot neighbor relationship
    • 3.6.c Implement and troubleshoot OSPFv3 address-family support
      • 3.6.c (i) IPv4 address-family
      • 3.6.c (ii) IPv6 address-family
    • 3.6.d Implement and troubleshoot network types, area types and router types
      • 3.6.d (i) Point-to-point, multipoint, broadcast, non-broadcast
      • 3.6.d (ii) LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
      • 3.6.d (iii) Internal router, ABR, ASBR
      • 3.6.d (iv) Virtual link
    • 3.6.e Implement and troubleshoot path preference
    • 3.6.f Implement and troubleshoot operations
      • 3.6.f (i) General operations
      • 3.6.f (ii) Graceful shutdown
      • 3.6.f (iii) GTSM (Generic TTL Security Mechanism)
    • 3.6.g Implement, troubleshoot and optimize OSPF convergence and scalability
      • 3.6.g (i) Metrics
      • 3.6.g (ii) LSA throttling, SPF tuning, fast hello
      • 3.6.g (iii) LSA propagation control (area types, ISPF)
      • 3.6.g (iv) IP FRR/fast reroute (single hop)
      • 3.6.g (v) LFA/loop-free alternative (multi hop)
      • 3.6.g (vi) OSPFv3 prefix suppression
  • 3.8 ISIS (for IPv4 and IPv6)
    • 3.8.a Describe basic ISIS network
    • 3.8.a (i) Single area, single topology
    • 3.8.b Describe neighbor relationship
    • 3.8.c Describe network types, levels and router types
    • 3.8.c (i) NSAP addressing
    • 3.8.c (ii) Point-to-point, broadcast
    • 3.8.d Describe operations
    • 3.8.e Describe optimization features
    • 3.8.e (i) Metrics, wide metric
  • 3.7 BGP
    • 3.7.a Describe, implement and troubleshoot peer relationships
      • 3.7.a (i) Peer-group, template
      • 3.7.a (ii) Active, passive
      • 3.7.a (iii) States, timers
      • 3.7.a (iv) Dynamic neighbors
    • 3.7.b Implement and troubleshoot IBGP and EBGP
      • 3.7.b (i) EBGP, IBGP
      • 3.7.b (ii) 4 bytes AS number
      • 3.7.b (iii) Private AS
    • 3.7.c Explain attributes and best-path selection
    • 3.7.d Implement, optimize and troubleshoot routing policies
      • 3.7.d (i) Attribute manipulation
      • 3.7.d (ii) Conditional advertisement
      • 3.7.d (iii) Outbound route filtering
      • 3.7.d (iv) Communities, extended communities
      • 3.7.d (v) Multi-homing
    • 3.7.e Implement and troubleshoot scalability
      • 3.7.e (i) Route-reflector, cluster
      • 3.7.e (ii) Confederations
      • 3.7.e (iii) Aggregation, AS set
    • 3.7.f Implement and troubleshoot multiprotocol BGP
    • 3.7.f (i) IPv4, IPv6, VPN address-family
    • 3.7.g Implement and troubleshoot AS path manipulations
      • 3.7.g (i) Local AS, allow AS in, remove private AS
      • 3.7.g (ii) Prepend
      • 3.7.g (iii) Regexp
    • 3.7.h Implement and troubleshoot other features
      • 3.7.h (i) Multipath
      • 3.7.h (ii) BGP synchronization
      • 3.7.h (iii) Soft reconfiguration, route refresh
    • 3.7.i Describe BGP fast convergence features
      • 3.7.i (i) Prefix independent convergence
      • 3.7.i (ii) Add-path
      • 3.7.i (iii) Next-hop address tracking
4.0 VPN Technologies
  • 4.1 Tunneling
    • 4.1.a Implement and troubleshoot MPLS operations
    • 4.1.a (i) Label stack, LSR, LSP
    • 4.1.a (ii) LDP
    • 4.1.a (iii) MPLS ping, MPLS traceroute
    • 4.1.b Implement and troubleshoot basic MPLS L3VPN
      • 4.1.b (i) L3VPN, CE, PE, P
      • 4.1.b (ii) Extranet (route leaking)
    • 4.1.c Implement and troubleshoot encapsulation
      • 4.1.c (i) GRE
      • 4.1.c (ii) Dynamic GRE
      • 4.1.c (iii) LISP encapsulation principles supporting EIGRP OTP
    • 4.1.d Implement and troubleshoot DMVPN (single hub)
      • 4.1.d (i) NHRP
      • 4.1.d (ii) DMVPN with IPsec using preshared key
      • 4.1.d (iii) QoS profile
      • 4.1.d (iv) Pre-classify
    • 4.1.e Describe IPv6 tunneling techniques
      • 4.1.e (i) 6in4, 6to4
      • 4.1.e (ii) ISATAP
      • 4.1.e (iii) 6RD
      • 4.1.e (iv) 6PE/6VPE
    • 4.1.g Describe basic layer 2 VPN – wireline
      • 4.1.g (i) L2TPv3 general principals
      • 4.1.g (ii) ATOM general principals
    • 4.1.h Describe basic L2VPN – LAN services
      • 4.1.h (i) MPLS-VPLS general principals
      • 4.1.h (ii) OTV general principals
  • 4.2 Encryption
    • 4.2.a Implement and troubleshoot IPsec with preshared key
      • 4.2.a (i) IPv4 site to IPv4 site
      • 4.2.a (ii) IPv6 in IPv4 tunnels
      • 4.2.a (iii) Virtual tunneling Interface (VTI)
  • 4.2.b Describe GET VPN
5.0 Infrastructure Security
  • 5.1 Device security
    • 5.1.a Implement and troubleshoot IOS AAA using local database
    • 5.1.b Implement and troubleshoot device access control
    • 5.1.b (i) Lines (VTY, AUX, console)
    • 5.1.b (ii) SNMP
    • 5.1.b (iii) Management plane protection
    • 5.1.b (iv) Password encryption
    • 5.1.c Implement and troubleshoot control plane policing
    • 5.1.d Describe device security using IOS AAA with TACACS+ and RADIUS
    • 5.1.d (i) AAA with TACACS+ and RADIUS
    • 5.1.d (ii) Local privilege authorization fallback
  • 5.2 Network security
    • 5.2.a Implement and troubleshoot switch security features
    • 5.2.a (i) VACL, PACL
    • 5.2.a (ii) Stormcontrol
    • 5.2.a (iii) DHCP snooping
    • 5.2.a (iv) IP source-guard
    • 5.2.a (v) Dynamic ARP inspection
    • 5.2.a (vi) port-security
    • 5.2.a (vii) Private VLAN
    • 5.2.b Implement and troubleshoot router security features
    • 5.2.b (i) IPv4 access control lists (standard, extended, time-based)
    • 5.2.b (ii) IPv6 traffic filter
    • 5.2.b (iii) Unicast reverse path forwarding
    • 5.2.c Implement and troubleshoot IPv6 first hop security
    • 5.2.c (i) RA guard
    • 5.2.c (ii) DHCP guard
    • 5.2.c (iii) Binding table
    • 5.2.c (iv) Device tracking
    • 5.2.c (v) ND inspection/snooping
    • 5.2.c (vii) Source guard
    • 5.2.c (viii) PACL
    • 5.2.d Describe 802.1x
    • 5.2.d (i) 802.1x, EAP, RADIUS
    • 5.2.d (ii) MAC authentication bypass
6.0 Infrastructure Services
  • 6.1 System management
    • 6.1.a Implement and troubleshoot device management
    • 6.1.a (i) Console and VTY
    • 6.1.a (ii) telnet, HTTP, HTTPS, SSH, SCP
    • 6.1.a (iii) (T)FTP
    • 6.1.b Implement and troubleshoot SNMP
    • 6.1.b (i) v2c, v3
    • 6.1.c Implement and troubleshoot logging
    • 6.1.c (i) Local logging, syslog, debug, conditional debug
    • 6.1.c (ii) Timestamp
  • 6.2 Quality of service
    • 6.2.a Implement and troubleshoot end-to-end QoS
    • 6.2.a (i) CoS and DSCP mapping
    • 6.2.b Implement, optimize and troubleshoot QoS using MQC
    • 6.2.b (i) Classification
    • 6.2.b (ii) Network based application recognition (NBAR)
    • 6.2.b (iii) Marking using IP precedence, DSCP, CoS, ECN
    • 6.2.b (iv) Policing, shaping
    • 6.2.b (v) Congestion management (queuing)
    • 6.2.b (vi) HQoS, sub-rate ethernet link
    • 6.2.b (vii) Congestion avoidance (WRED)
    • 6.2.c Describe layer 2 QoS
    • 6.2.c (i) Queuing, scheduling
    • 6.2.c (ii) Classification, marking
  • 6.3 Network services
    • 6.3.a Implement and troubleshoot first-hop redundancy protocols
    • 6.3.a (i) HSRP, GLBP, VRRP
    • 6.3.a (ii) Redundancy using IPv6 RS/RA
    • 6.3.b Implement and troubleshoot network time protocol
    • 6.3.b (i) NTP master, client, version 3, version 4
    • 6.3.b (ii) NTP Authentication
    • 6.3.c Implement and troubleshoot IPv4 and IPv6 DHCP
    • 6.3.c (i) DHCP client, IOS DHCP server, DHCP relay
    • 6.3.c (ii) DHCP options
    • 6.3.c (iii) DHCP protocol operations
    • 6.3.c (iv) SLAAC/DHCPv6 interaction
    • 6.3.c (v) Stateful, stateless DHCPv6
    • 6.3.c (vi) DHCPv6 prefix delegation
    • 6.3.d Implement and troubleshoot IPv4 network address translation
    • 6.3.d (i) Static NAT, dynamic NAT, policy-based NAT, PAT
    • 6.3.d (ii) NAT ALG
    • 6.3.e Describe IPv6 network address translation
    • 6.3.e (i) NAT64
    • 6.3.e (ii) NPTv6
  • 6.4 Network optimization
    • 6.4.a Implement and troubleshoot IP SLA
      • 6.4.a (i) ICMP, UDP, Jitter, VoIP
    • 6.4.b Implement and troubleshoot tracking object
      • 6.4.b (i) Tracking object, tracking list
      • 6.4.b (ii) Tracking different entities (e.g. interfaces, routes, IPSLA, and such)
    • 6.4.c Implement and troubleshoot netflow
      • 6.4.c (i) Netflow v5, v9
      • 6.4.c (ii) Local retrieval
      • 6.4.c (iii) Export (configuration only)
    • 6.4.d Implement and troubleshoot embedded event manager
      • 6.4.d (i) EEM policy using applet
    • 6.4.e Identify performance routing (PfR)
      • 6.4.e (i) Basic load balancing
      • 6.4.e (ii) Voice optimization
7.0 Evolving Technologies

7.1 Cloud

  • 7.1.a Compare and contrast Cloud deployment models
    • 7.1.a [i] Infrastructure, platform, and software services [XaaS]
    • 7.1.a [ii] Performance and reliability
    • 7.1.a [iii] Security and privacy
    • 7.1.a [iv] Scalability and interoperability
  • 7.1.b Describe Cloud implementations and operations
    • 7.1.b [i] Automation and orchestration
    • 7.1.b [ii] Workload mobility
    • 7.1.b [iii] Troubleshooting and management
    • 7.1.b [iv] OpenStack components

7.2 Network programmability [SDN]

  • 7.2.a Describe functional elements of network programmability [SDN] and how they interact
    • 7.2.a [i] Controllers
    • 7.2.a [ii] APIs
    • 7.2.a [iii] Scripting
    • 7.2.a [iv] Agents
    • 7.2.a [v] Northbound vs. Southbound protocols
  • 7.2.b Describe aspects of virtualization and automation in network environments
    • 7.2.b [i] DevOps methodologies, tools and workflows
    • 7.2.b [ii] Network/application function virtualization [NFV, AFV]
    • 7.2.b [iii] Service function chaining
    • 7.2.b [iv] Performance, availability, and scaling considerations

7.3 Internet of Things

  • 7.3.a Describe architectural framework and deployment considerations for Internet of Things [IoT]
    • 7.3.a [i] Performance, reliability and scalability
    • 7.3.a [ii] Mobility
    • 7.3.a [iii] Security and privacy
    • 7.3.a [iv] Standards and compliance
    • 7.3.a [v] Migration
    • 7.3.a [vi] Environmental impacts on the network
Menu
Need Help? Chat with us